
Junos Intermediate Routing (JIR)
- 01/09/2019

Junos Enterprise Switching (JEX)
- 01/09/2019

Introduction to the Junos Operating System (IJOS)
- 01/09/2019

Junos Security (AJSEC)
- 01/09/2019

Advanced Junos Enterprise Switching (AJEX)
- 01/09/2019

Advanced Junos Enterprise Rounting (AJER)
- 01/09/2019

Junos Security (JSEC)
- 01/09/2019

Palo Alto Firewall: Troubleshooting (EDU-330)
- 29/08/2019




Forcepoint Web Security
- 26/08/2019

Forcepoint Next Generation Firewall
- 26/08/2019

Forcepoint Email Security
- 26/08/2019

Forcepoint Data Loss Prevention
- 26/08/2019

Junos Intermediate Routing (JIR)
- 2019-09-01
Overview:
This two-day course provides students with intermediate routing knowledge and configuration examples. The course includes an overview of protocol-independent routing features, load balancing and filter-based forwarding, OSPF, BGP, IP tunneling, and high availability (HA) features. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and monitoring device operations. This course uses Juniper Networks vSRX Series Services Gateways for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. This course is based on Junos OS Release 18.2R1.9.
Training Schedule :
For More Information please contact Info@optimaps.net

Junos Enterprise Switching (JEX)
- 2019-09-01
Overview:
This two-day course is designed to provide students with intermediate switching knowledge and configuration examples using Junos Enhanced Layer 2 Software. This course includes an overview of switching concepts and operations, virtual LANs (VLANs), the Spanning Tree Protocol (STP), port and device security features, and high availability (HA) features. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and in monitoring device operations. This course uses Juniper Networks EX4300 Series Ethernet Switches for the hands-on components, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. Optional lab components are available allowing attendees to perform network management and troubleshooting tasks using Junos Space Network Director 3.0. This course is based on Junos OS Release 17.1R1.8.
Training Schedule :
Date |
Time |
11 -
12 December |
9 am – 5 pm (Cairo Time) |

Introduction to the Junos Operating System (IJOS)
- 2019-09-01
Overview:
This three-day course provides students with the foundational knowledge required to work with the Junos operating system and to configure Junos devices. The course provides a brief overview of the Junos device families and discusses the key architectural components of the software. Key topics include user interface options with a heavy focus on the command-line interface (CLI), configuration tasks typically associated with the initial setup of devices, interface configuration basics with configuration examples, secondary system configuration, and the basics of operational monitoring and maintenance of Junos devices. The course then delves into foundational routing knowledge and configuration examples including general routing concepts, routing policy, and firewall filters. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and monitoring basic device operations. This course is based on Junos OS Release 15.1X49
Training Schedule :
Date |
Time |
15 -
19 Sept |
9 am – 5 pm (Cairo Time) |

Junos Security (AJSEC)
- 2019-09-01
Overview:
This five-day course, which is designed to build off the current Junos Security (JSEC) offering, delves deeper into Junos security and next-generation security features. Through demonstrations and hands-on labs, you will gain experience in configuring and monitoring the advanced Junos OS security features with advanced coverage of virtualization, AppSecure, advanced logging and reporting, next generation Layer 2 security, user firewall, next generation advanced anti-malware with Sky ATP, next generation security intelligence with software-defined secure networks. This course uses Juniper Networks SRX Series Services Gateways for the hands-on component. This course is based on Junos OS Release 15.1X49-D90.7 and Junos Space Security Director 16.2.
Training Schedule :
For More Information please contact Info@optimaps.net

Advanced Junos Enterprise Switching (AJEX)
- 2019-09-01
Overview:
This two-day course is designed
to provide detailed coverage of virtual LAN (VLAN) operations, Multiple
Spanning Tree Protocol (MSTP) and VLAN Spanning Tree Protocol (VSTP),
authentication and access control for Layer 2 networks, IP telephony features,
class of service (CoS) and monitoring and troubleshooting tools and features
supported on the EX Series Ethernet Switches. Through demonstrations and
hands-on labs, students will gain experience in configuring and monitoring the
Junos operating system and in monitoring device and protocol operations. This
course uses Juniper Networks EX 4300 Series Ethernet Switches for the hands-on
component, but the lab environment does not preclude the course from being
applicable to other Juniper hardware platforms running the Junos OS. Optional
lab components are available allowing attendees to perform network management
and troubleshooting tasks using Junos Space Network Director 3.0. This course
is based on Junos OS Release 17.1R1.8.
Training Schedule:
Please contact info@optimaps.net for the dates and timings.

Advanced Junos Enterprise Rounting (AJER)
- 2019-09-01
Overview:
This four-day course is designed to provide students
with the tools required for implementing, monitoring, and troubleshooting Layer
3 components in an enterprise network. Detailed coverage of OSPF, BGP, class of
service (CoS), and multicast is strongly emphasized. The course also exposes
students to common troubleshooting commands and tools used to troubleshoot
various intermediate to advanced issues. Through demonstrations and hands-on
labs, students will gain experience in configuring and monitoring the Junos
operating system and in monitoring device and protocol operations. This course
uses Juniper Networks vSRX virtual firewall for the hands-on component, but the
lab environment does not preclude the course from being applicable to other
Juniper hardware platforms running the Junos OS. This course is based on Junos
OS Release 15.1X49-D80.
Training Schedule:
Please
contact info@optimaps.net for the dates
and timings.

Junos Security (JSEC)
- 2019-09-01
Overview:
This five-day course covers the configuration, operation, and implementation of SRX Series Services Gateways in a typical network environment. Key topics within this course include: security zones, security policies, Network Address Translation (NAT), IPsec VPNs, and chassis clustering. Through demonstrations and hands-on labs, students will gain experience in configuring the Junos OS and monitoring device operations of Junos security devices. This course uses Juniper Networks SRX Series Services Gateways for the primary hands-on component. This course is based on Junos OS Release 17.4R1.16 and the vSRX virtual appliance.
Training Schedule :
For More Information please contact Info@optimaps.net

Overview:
The Palo Alto Networks Firewall 8.1 Essentials: Configuration and Management (EDU-210) course is five days of instructor-led training that should enable you to:
·
Configure and manage the essential features of
Palo Alto Networks® nextgeneration firewalls
·
Configure and manage GlobalProtect to protect
systems that are located outside of the data center perimeter
·
Configure and manage firewall high availability
·
Monitor network traffic using the interactive
web interface and firewall reports
Course Objective:
Successful completion of this five-day, instructor-led course should enhance the student’s understanding of how to configure and manage Palo Alto Networks® next-generation firewalls. The student will get hands-on experience configuring, managing, and monitoring a firewall in a lab environment.
Training Schedule :
Date |
Time |
13 - 17 Oct |
9 am – 5 pm (Cairo Time) |
1 - 2 December |
9 am – 5 pm (Cairo Time) |

Forcepoint Web Security
- 2019-08-26
Overview:
During this four-day hands-on virtual instructor-led course, you will gain an understanding of the core competencies and skills needed to practice as a system administrator who manages Forcepoint Web Security. The core competencies include: explain the components architecture, reproduce best practices for policy creation, propose better incident management, and expand the health assessment of a successful Forcepoint Web Security deployment. The skills include: formulate effective web policy creation, structure meaningful reporting, and provide guidelines for incident management.
• End-User/Customers: System administrators, network security administrators, IT staff.
• Channel Partners: Sales Engineers, consultants, implementation specialists.
Format | Duration | Prerequisites | Certification Requirements |
Virtual/Instructor-Led | 4 Days | None | •Completion of all course sessions • Configured lab exercises • Certification exam (multiple choice) |
Training
outlines:
1.
Understanding and Getting
Started with Web Security
2.
Policy Enforcement and
Filtering
3.
Monitoring Web Security
Activities
4. Disaster Response and Recovery
Training Schedule:
Date | Time |
6-9 June 2021 (virtual) | 10AM-2PM Cairo Time |

Forcepoint Next Generation Firewall
- 2019-08-26
Overview:
In this 16-hour hands-on virtual instructor-led training course, you will learn the skills needed to practice as a system administrator responsible for installation, configuration, administration, and support of the Forcepoint NGFW. Through instructional content, demonstrations, and hands-on lab practice exercises, you will learn the requirements and recommendations to successfully deploy Forcepoint NGFW in a variety of network environments. You will develop expertise in creating security rules and policies, managing users and authentication, configuring VPNs, traffic deep inspection, performing common administration tasks including status monitoring and reporting.
Intended audience:
• New and existing customers of Forcepoint NGFW
• Forcepoint Channel Partners
• Forcepoint NGFW end users
Format | Duration | Prerequisites | Certification Requirements |
Virtual/Instructor-Led | 4 Days | • General understanding of system administration and Internet services • Basic knowledge of networking and computer security concepts • A computer that meets the requirements noted at the end of this document | This course prepares you to take and pass the Certified Forcepoint Next Generation Firewall Administrator (NGFW Virtual) Exam. The exam is included in the price of the course, but the execution of the exam is not accomplished during the course. A minimum score of 80% on the multiple-choice online exam is required to obtain certification. |
Training outlines:
- NGFW
Overview
- SMC
Overview
- Getting
Started with SMC
- NGFW
Policies and Templates
- Access
Control and NAT
- Traffic
Inspection
- Inspection
Policies
- Malware
Detection and File Filtering Policies
- Alerting
and Notifications
- Users
and Authentication
- Mobile
VPN and SSL VPN Porta
- Site-to-Site
VPN
- Using
Logs
- Monitoring,
Statistics, and Reporting
- Policy
Tools
- Troubleshooting
- What’s
new in NGFW
Training Schedule :
Date | Time |
21-24 March 2021 (virtual) | 10 AM to 2PM (Cairo Time) |
Please contact training@optimaps.com for more information.

Forcepoint Email Security
- 2019-08-26
Overview:
In this
virtual instructor-led training course, you will learn how to setup, configure,
and administer the Forcepoint Email Security solution. Through instructional
content, demonstrations, and hands-on lab practice exercises, you will learn
the requirements and recommendations to successfully deploy Forcepoint Email
Security in a variety of network environments. You will develop skills in
creating email policies, reducing the amount of spam messages, configure email
encryption, incident management, reporting, and system architecture and
maintenance.
Intended audience:
• End-User/Customers: System administrators, network security administrators, IT staff.
• Channel Partners: Sales Engineers, consultants, implementation specialists.
Format | Duration | Prerequisites | Certification Requirements |
Virtual/Instructor-Led | 3 Days | None | •Completion of all course sessions • Configured lab exercises • Certification exam (multiple choice) |
Course objectives:
• Describe the key capabilities of Forcepoint Email Security
• Understand the required and add-on components of Forcepoint Email Security
• Understand the difference between various block/permit lists
• Configure email DLP policies
• Configure and customize PEM portal
• Understand email encryption methods
• Run and interpret reports and configure logs
• Understand multiple deployment scenarios Perform initial setup configuration
• Configure connection level controls and message properties
• Create policies to fulfill various organization needs Understand policy and filter basics
• Understand how to upgrade the system and disaster recovery procedures
Training outlines:
1. Forcepoint Email Security Course Overview
2. Forcepoint Email Security Features and New Features
3. Understanding the Product Deployment
4. Getting Started with Forcepoint Email Security
5. Setting up Email Security Users
6. Defining Email Routing
7. Managing Traffic: Antispam Related Configurations
8. Managing Traffic: Advanced Configurations
9. Configuring Email Security Policies
10. Personal Email Manager (PEM)
11. Advanced Configurations
12. Email Security Maintenance and Reporting
13. Course Review of All Modules
Training Schedule:
Date | Time |
29-31 March 2021 (virtual) | 11AM to 3PM (Cairo Time) |
Please contact training@optimaps.com for more information.

Forcepoint Data Loss Prevention
- 2019-08-26
Certification Requirements:
- Completion of all course sessions
- Configured lab exercises
- Certification exam (multiple choice)
Please contact info@optimaps.net for the dates and timings.